223 Sample Changer


Manufacturing Standards Meets applicable safety and EMC certification standards; UL and CE certified
Arm Speed X/Y: 25 cm/sec (9.9 in./sec)
Z: 2.0, 3.0, 6.2, 12.7, 24.7 cm/sec (0.79, 1.18, 2.44, 5.00, 9.72 in./sec)
Communication Interface RS-232 or GSIOC; Four inputs (contact closure, TTL, or open-collector), four relay outputs and one switched +12V DC (500 mA max.) output
Liquid Handling Reproducibility:
0.8% CV at 10 µL
98.2% at 10 µL
Front Panel One yellow LED indicator light
Horizontal Motion Strength X: 2 kg (5 lbs.)
Y: 1.5 kg (3 lbs.)
Maximum Number of Vials 432 (7 x 40 mm or 10 x 75 mm)
Number of Racks Up to four Code 20- or 30-Series racks
Power Requirements Frequency: 50–60 Hz
Voltage: 90–120 or 220–240V, mains voltage fluctuations not to exceed ±10% of the nominal voltage
Current rating: one 2.0A fuse for 100–120V or two 2.0A fuses for 220–240V
Probe Positioning Performance Accuracy: ±1 mm in X/Y/Z dimensions
Repeatability: ±0.25 mm in X/Y/Z dimensions
Probe Rinse Through a dedicated rinse station for rinsing the inside and outside of the probe
Sampler Type X/Y/Z with stationary rack design
Software Via Gilson TRILUTION™ Software
Vertical Punch Strength 1 kg (2 lbs.)
Dimensions (w x d x h*) 53.5 x 43.7 x 60* cm (21.1 x 17.2 x 24* in.)
Weight 18.6 kg (41 lbs.)
*Maximum height. Z-arm height is adjustable to accommodate vessel heights between 1 and 150 mm (dependent on installed Z-arm).
Test tube