Peristaltic Pump - MINIPULS 3




Specifications

Manufacturing Standards Meets applicable safety and EMC certification standards; UL and CE certified
Communication Interface RS-232 or GSIOC; Two TTL-compatible inputs for control of start/stop and direction of flow and one analog input (0–5V) for variable control of motor speed
Environmental Conditions Indoor use
Altitude: up to 2000 m
Temperature range: 5–40°C
Air pressure: 75–105 kPa
Pollution degree: 1 or 2, in accordance with IEC 66
Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C
Flow Rate Standard flow rates (1, 2, 4, or 8 channels): 0.3 µL/min–30 mL/min at a maximum pressure of 0.5 MPa.
High flow rates (2 or 4 channels): 1 mL/min–220 mL/min at a maximum pressure of 0.3 MPa
Head Speed Continuous adjustment from 0 to 48 rpm by 0.01 rpm increments up to 9.99 rpm and by 0.1 rpm increments above 10 rpm
Motor Speed Stability 0.5% for any variation of line voltage, torque, or temperature
Peristaltic Tubing Diameter Standard model: 0.25–4 mm (ID)
High-Flow model: 2–8 mm (ID)
Power Requirements Frequency: 47–63 Hz
Voltage: 90–132 or 180–264V; mains voltage fluctuations not to exceed ±10% of the nominal voltage
Consumption: Full load 45W at 220V; no load 35W at 220V
Pump Heads Standard model: 1-, 2-, 4-, or 8-channel heads with 10 stainless steel rollers per head
High-Flow model: 2- or 4-channel heads with five stainless steel rollers per head
Software TRILUTION® Software
Dimensions (w x d x h) 15 x 17.5 x 18 cm (5.9 x 6.9 x 7.1 in.)
Weight 4 kg (9 lbs.)
Test tube