PIPETMAN® G






Product Details

Decontamination & Autoclaving

The Pipetting Standard With Improved Comfort!

Your pipette could be contaminated accidentally. The pipette parts most subject to contamination are the tip-ejector and tip-holder.

For this reason, each and every Gilson PIPETMAN range has autoclavable lower parts.

Autoclaving

Tip-ejector, tip-holder and connecting nut can be sterilized in the laboratory under the following conditions: Moist heat/121°C/20 minutes/1 bar.

Decontamination

For maintenance and decontamination procedures, please refer to the related PIPETMAN user's guide.

Quality Certificates

The Pipetting Standard With Improved Comfort!

Certificate of conformity
Gilson SAS certifies that each pipette has been inspected and validated in accordance with the Gilson Quality Assurance System. Each pipette is identified with an engraved identification number for traceability and delivered with a certificate of conformity.

Calibration certificate: Accreditation
Many countries around the world have one or more organizations responsible for the accreditation of their national laboratories. Most of these accreditation bodies have now adopted an international guide, called ISO 17025.

The ISO 17025 contains “all the requirements that testing and calibration laboratories have to meet if they wish to demonstrate that they operate a quality system, are technically competent, and are able to generate technically valid results.” - ISO 17025-1999 -.

In France, the recognized accredited organization is called COFRAC, in the United Kingdom it is called UKAS and in the USA there are several accredited organizations called A2LA, NVLAP and ICBES.

Gilson Pipette Delivered with a Calibration Certificate

  • To respond to specific requests, especially for accredited laboratories, our calibration laboratory in France can deliver the pipettes with a calibration certificate, validated by the COFRAC organization.

We use either of the two following methods recognized by COFRAC:

  • The standardized ISO 8655-6 method (10 measurements) without changing tip.
  • The special Gilson method (4 measurements). This method has been validated by the COFRAC organization.
Model Ordering reference
ISO 8655 method Gilson method
3 volumes x 10 measurements 3 volumes x 4 measurements
P2G

Plastic ejector F144054PC
Metal ejector F144054MC

F144054PCG
F144054MCG

P10G

Plastic ejector F144055PC
Metal ejector F144055MC

F144055PCG
F144055MCG

P20G

Plastic ejector F144056PC
Metal ejector F144056MC

F144056PCG
F144056MCG

P100G

Plastic ejector F144057PC
Metal ejector F144057MC

F144057PCG
F144057MCG

P200G

Plastic ejector F144058PC
Metal ejector F144058MC

F144058PCG
F144058MCG

P1000G

Plastic ejector F144059PC
Metal ejector F144059MC

F144059PCG
F144059MCG

P5000G F144066C F144066CG
P10mL G F144067C F144067CG