Product Details

Quality Certificates

The Pipetting Standard With Improved Comfort!

Certificate of conformity

Gilson SAS certifies that each pipette has been inspected and validated in accordance with the Gilson Quality Assurance System. Each pipette is identified with an engraved identification number for traceability and delivered with a certificate of conformity.

Calibration certificate: Accreditation

Many countries around the world have one or more organizations responsible for the accreditation of their national laboratories. Most of these accreditation bodies have now adopted an international guide, called ISO 17025.

The ISO 17025 contains “all the requirements that testing and calibration laboratories have to meet if they wish to demonstrate that they operate a quality system, are technically competent, and are able to generate technically valid results.” - ISO 17025-1999 -.

In France, the recognized accredited organization is called COFRAC, in the United Kingdom it is called UKAS and in the USA there are several accredited organizations called A2LA, NVLAP and ICBES.

Gilson Pipette Delivered with a Calibration Certificate

  • To respond to specific requests, especially for accredited laboratories, our calibration laboratory in France can deliver the pipettes with a calibration certificate, validated by the COFRAC organization.

We use either of the two following methods recognized by COFRAC:

  • The standardized ISO 8655-6 method (10 measurements) without changing tip.
  • The special Gilson method (4 measurements). This method has been validated by the COFRAC organization.


Model Ordering reference
ISO 8655 method Gilson method
3 volumes x 10 measurements 3 volumes x 4 measurements
P2N F144561C F144561CG
P10N F144562C F144562CG
P20N F144563C F144563CG
P100N F144564C F144564CG
P200N F144565C F144565CG
P1000N F144566C F144566CG

Decontamination & Autoclaving

The Pipetting Standard With Improved Comfort!

Your pipette could be contaminated accidentally. The pipette parts most subject to contamination are the tip-ejector and tip-holder.

For this reason, each and every Gilson PIPETMAN range has autoclavable lower parts.


Tip-ejector, tip-holder and connecting nut can be sterilized in the laboratory under the following conditions: Moist heat/121°C/20 minutes/1 bar.


For maintenance and decontamination procedures, please refer to the related PIPETMAN user's guide.

Replacement Parts

The Pipetting Standard With Improved Comfort!

Spare parts manufactured by Gilson are products of intensive research and stringent quality control, guaranteed to deliver value and assure reliability and precision over the long run.

Service Kits

  Ordering reference
Item Key P2N P10N P20N P100N P200N P1000N
Service kit 1st level
(1 tip-holder - 3 piston seals and 3 O-rings)
C+D+E F144501 F144502 F144495 F144496 F144497 F144498
Service kit 2nd level
(1 push-button - 1 connecting nut - 1 tip-ejector - 1 tip-ejector adapter for PIPETMAN P2N/P10N)
A+B+F F1619701 F1619711 F1619721 F1619731 F1619741 F1619781


Replacement Parts

  Ordering reference
Item Key P2N P10N P20N P100N P200N P1000N
Seal and O-ring (5 sets) C & D F144861 F144862 F144863 F144864 F144865 F144866
Adapter for dual-position tip-ejector (plastic part only - 5 sets) ** F144879 F144879 * * * *
*Not applicable with this model.
**Not shown.

Test tube