Peristaltic Pump Heads and Cartridges - MINIPULS® Evolution




 

When it’s time to add capacity & flexibility to the MINIPULS®, Gilson offers pump heads &  channel cartridges, from one to sixteen. These channel guides allow for:

 

  •  Flow rates from 0.2 µL/min to 340 mL/min.

Stackable pump heads in one click for 1 to 16 channels.

Medium and high-flow pump heads used simultaneously in the same module for a larger flow rate range during the same application.

Reproducibility of flow rate on all channels with a variation under 0.1%.

0.01 rpm readability below 10 rpm, perfect for precise flow rate adjustment.

Offers back pressure resistance up to 0.3 MPa (42 psi).

  • Quick, flexible and safe set up: cartridges snap in and out in one click, pump heads can be changed within seconds while pump is operating, adjustable tubing occlusion for simple and fine pressure adjustment, drip tray under pump heads permits leak detection and accessory case to keep connectors readily available.
  • Full adaptability: easy to integrate into existing system; control manually through the keypad, footswitch or remotely through another device (by electrical contact, automated instrument or computer).
  • Select your pump head(s) and tubing: Three different pump heads delivered with cartridges are available separately. Each cartridge must be fitted with tubing adapted to your application. Open the table below to select the appropriate tubing, extension tubing and connectors knowing required flow rates and nature of pumped liquids.
  • Once you know the nature of your fluids and the required flow rate, refer to the table below to select the appropriate tubing, extension tubing and connectors.

Tubing Selection Chart

  • Tubing properties are given in the table below:

Tubing Properties Chart

 

Test tube